![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png){kind=small}
There be BIG problems.
A simple enough act, you'd think, wiring in a new wall switch using the same wiring, the same type of switch as before. You would, wouldn't you? I know we did.
A mighty struggle ensued (as described in yesterday's post) but seemed to end well and we thought the trouble was fixed, last night everything was just fine. Woke this morning to find no lights and - most mysterious of all - no immersion heater, meaning both the 5a and the 30a circuits have gone down but no fuses have blown. This is decidedly strange - even the emergency electrician (who can't fit us in till Wednesday) is having trouble getting his head around it. Mark thinks he knows what the problem is but doesn't feel confident to fix it. It means he'll have to drive back over on Wednesday to deal with Electrician Guy and lord alone knows how much that's going to cost.
Mercifully the 15a wall circuits are fine so we have table lamps and telly and all the important things (except hot water )o:)... But... But...
::hangs head and sighs::
So then I went down to complete (what I thought were) the last tasks, fixing a sink tile (done, sans complications thank GOD!) and cleaning off the hideous mozaic behind the stove so we can put up the new tiles (when they arrive).
Cue massive problem #2. There's a big hole in the chimney behind the grotty tiles. It looks like the old cement has dried and crumbled and some stones have fallen down into the chimney. At least this goes some way to explaining why the chimney's not been drawing well lately but - has to be fixed. Mark's got the fire cement and heavy-duty filler and is slowly, layer by layer, patching up the hole so, finger's crossed - that's a problem we knew we had, but had no real explanation for, discovered and - plz? O All the Gods show mercy - fixed? ::hardly dares to hope::
Anyway, I'm off to put the first coat of sealant on the stone floor. Pray for me.
A simple enough act, you'd think, wiring in a new wall switch using the same wiring, the same type of switch as before. You would, wouldn't you? I know we did.
A mighty struggle ensued (as described in yesterday's post) but seemed to end well and we thought the trouble was fixed, last night everything was just fine. Woke this morning to find no lights and - most mysterious of all - no immersion heater, meaning both the 5a and the 30a circuits have gone down but no fuses have blown. This is decidedly strange - even the emergency electrician (who can't fit us in till Wednesday) is having trouble getting his head around it. Mark thinks he knows what the problem is but doesn't feel confident to fix it. It means he'll have to drive back over on Wednesday to deal with Electrician Guy and lord alone knows how much that's going to cost.
Mercifully the 15a wall circuits are fine so we have table lamps and telly and all the important things (except hot water )o:)... But... But...
::hangs head and sighs::
So then I went down to complete (what I thought were) the last tasks, fixing a sink tile (done, sans complications thank GOD!) and cleaning off the hideous mozaic behind the stove so we can put up the new tiles (when they arrive).
Cue massive problem #2. There's a big hole in the chimney behind the grotty tiles. It looks like the old cement has dried and crumbled and some stones have fallen down into the chimney. At least this goes some way to explaining why the chimney's not been drawing well lately but - has to be fixed. Mark's got the fire cement and heavy-duty filler and is slowly, layer by layer, patching up the hole so, finger's crossed - that's a problem we knew we had, but had no real explanation for, discovered and - plz? O All the Gods show mercy - fixed? ::hardly dares to hope::
Anyway, I'm off to put the first coat of sealant on the stone floor. Pray for me.
lethargic
There are 19 comments on this entry.